Lang

Humidity and temperature transmitters

HTE.PF: Chemical-resistant humidity transmitter for harsh environments

Chemical-resistant humidity transmitter for harsh environments HTE.PF

  • Relative humidity measurement range: from 0 to 100%
  • Temperature measurement range:
    • analog output: -20 to +80 °C
    • RS-485 interface: -40 to +80 °C
  • Outputs: 0...10 V, 4...20 mA, RS-485 (specified in ordering code)
  • Supply voltage: determined by the output signal type
  • The housing enclosure is fully covered with compound to protect the electronic board from aggressive chemicals
  • The sensing element is protected by a porous PTFE layer
  • Housing material: AISI304 stainless steel
  • Applications: proofing chambers, mushroom cultivation, vegetable ripening, cheese ripening, HVAC systems, meteorology, incubators, poultry farms, pig farms, etc.
5 modifications
HTEHTE.THI: Humidity and temperature transmitter with THI calculation

HTE.PF-THI: Humidity and temperature transmitter with THI calculation

  • Configuration: rod type
  • Temperature measurement range: -20…+80 °C
  • Outputs: THI index, temperature, RS-485
  • Protection of the electronic board and sensing element from aggressive chemicals
  • Housing material: AISI 304 stainless steel
  • Applications: livestock farms, cowsheds, etc.
1 modification
Humidity and temperature transmitter for HVAC systems HTE.Vx

Humidity and temperature transmitter for HVAC systems HTE.Vx

  • Configuration: duct-mount or wall-mount
  • Temperature measurement range: -40…+80 °C
  • Outputs: 0…10 V, 4…20 mA, RS-485
  • Applications: HVAC systems
3 modifications
High-temperature humidity and temperature transmitters HTE.Tx1

High-temperature humidity and temperature transmitters HTE.Tx1

  • Configuration: duct-mount or with a remote measuring probe
  • Temperature measurement range: -40…+120 °C
  • Outputs: 0…10 V, 4…20 mA, RS-485 (specified in ordering code)
  • The sensing element is protected from aggressive chemicals
  • Probe material: AISI 304 stainless steel
  • Applications: climate chambers, brick drying chambers, pasta drying, etc.
2 modifications
Humidity and temperature transmitter for compressed air systems up to 16 bar HTE.PS

Humidity and temperature transmitter for compressed air systems up to 16 bar HTE.PS

  • Configuration: threaded mount
  • Temperature measurement range: -40…+80 °C
  • Outputs: 0…10 V, 4…20 mA, RS-485
  • Probe material: AISI304 stainless steel
  • Connecting thread G1/2
  • Applications: compressor systems
2 modifications